Morclean's ATEX range of high pressure cleaners

Morclean presently supply a range of ATEX high pressure cleaners. Electrical and non electrical equipment and installations in potentially explosive atmospheres must be specially designed and constructed so that the risks of ignition are eliminated or reduced.

All new equipment must comply with The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 1996 that implements the European ATEX Directive. This requires it to be assessed as suitable for a particular explosive atmosphere type and for this to be marked on the equipment along with CE and ATEX markings.

Morclean produce a wide range of ATEX approved, Zone Rated pressure washers, steam cleaners and hot water cleaners.

They can be built to your specific requirements including machines built to:

Zone 1 ATEX CE Ex II 2G EEx IIB T4
ATEX CE Ex II 2G EEx IIB T4
ATEX EExd IIB T4 CE Ex II 2G
Dust - Zone 22
Vapour - Zone 1 IIB T3
EEx D EDE 209 Rev 03
EEx D IIC T4 Zone 1
Zone 1 IIB T4

Below are typical examples of ATEX pressure washers we can supply. These machines are constructed of a robust steel chassis which is stove enamelled with a stainless steel cover, are available in mobile or stationary models and include 10m high pressure hose, gun and lance.

Cold Water Mobile

Maximum Pressure 100 - 200Bar.

Flow rate of between 12 and 21 litres per minute.

110, 240 or 415 volts.

Dimensions are 35" high, 20" wide, 36" deep.

Weight 60Kg.

Cold Water Stationary

Maximum Pressure 100 - 200Bar.

Flow rate of between 12 and 21 litres per minute.

110, 240 or 415 volts.

Dimensions are 16"" high, 29" wide, 20" deep.

Weight 70Kg.

Electrically Heated Mobile

Maximum Pressure 100 - 200Bar.

Flow rate of between 12 and 21 litres per minute.

110, 240 or 415 volts.

Dimensions are 760mm high, 740mm wide, 1040mm long.

Weight 150-200Kg.

Electrically Heated Stationary

The Electrically Heated Stationary cabinets come complete with removable lid for easy servicing and are constructed of either robust steel, which is stove enamelled or stainless steel. This is ideal for anyone who requires a fixed, secure, safe unit. They are each built to the customer's specification and can be supplied in any colour. These units come complete with variable pressure control, thermostat, thermal overloads, auto time shut down, 10m high pressure hose, gun and lance.

Maximum Pressure 100 - 200Bar.

Flow rate of between 12 and 21 litres per minute.

110, 240 or 415 volts.

Dimensions are 1590mm high, 840mm wide, 580mm deep.

Weight 200-230Kg.

The requirements within a zoned area are specific and varied, therefore all our ATEX high pressure washers are built to order on a bespoke basis.