Our R&D department has developed, and recently launched, the new Therma Flow hybrid hot water steam cleaner, a low-flow machine that uses just 7.5 litres per min of water. The genius of this machine, when compared to traditional equivalent jet wash that would produce between 15 and 21 litres per min, is that the  Therma Flow  uses half the water consumption and disposal, resulting in reduced water for sites where drainage is limited or water reclaim is required. If there is no foul drain, there are 2 options because wastewater/wash water must NOT enter a surface drain storm drain or soakaway. T here is either a) less water to tanker away, or b) less water to be recycled if you're using only half the water, and l ess water means less cost and use of water, and less water to buy-in, making the  Therma Flow  e nergy saving, g reen and e fficient.  ✅   Half the water ✅   All the power ✅   Zero emissions ✅   Carbon Neutral  ✅  ...

The Installation of a new 200M2 wash bay - with dual user wash points, interceptor, and silt trap - is underway. With deliveries and marking out already in progress, this exciting project is inching closer to a Spring completion. The wash bay is intended for cleaning down fire vehicles for a military aircraft testing unit, and the works will include  excavation of the area and civils to install the below-ground tanks, alongside the installation of a twin hot water high-pressure jet wash with dual user posts and hose reels.  The project will be Turnkey with end-to-end project management and a complete system ready to handover to the client. Click on the following links if you're interested in viewing our  past  and most  current  project portfolios. Alternatively, give us a ring on 01246 471147 or email info@morclean.com to discuss your needs, or visit our website at www.morclean.com to view our full range of products.